Morrahome linen custom roller shades cordless

• Measure the Window Install the brackets according to your chosen mounting method, ensuring they are level.
• Install the Brackets: Install the brackets according to your chosen mounting method, ensuring they are level.
• Attach the Shade: Secure the roller shade onto the brackets, making sure it is firmly in place.
• Test the Operation: Lower and raise the shade to check for smooth operation, and adjust the tension if needed.
• Install Decorative Accessories (Optional): If there are decorative accessories like a valance, install them according to the instructions.

For detailed steps, please refer to the full tutorial.

Cordless roller shades with a spring mechanism work using an internal spring system that allows you to raise and lower the shades without the need for cords. Here's how they work:

1. Spring Mechanism
spring-loaded roller that controls the movement of the fabric. When you pull the shade down, the spring is stretched. When you release the shade, the spring gently pulls the fabric back up.

2. Operation

• To lower the shade, you simply pull on the bottom of the shade or a handle (if there is one). The tension in the spring causes the fabric to unroll as you pull.
• To raise the shade, you pull the shade down slightly, then release. The spring inside the mechanism will automatically pull the fabric back up smoothly to its fully rolled position.
  

3. Benefits

• Cordless operation reduces the risk of accidents with dangling cords, making it easier to use.
• Without cords, cordless roller shades provide a clean, modern aesthetic.
• Some models allow you to adjust the spring tension to control how easily or tightly the shade operates, offering a customized experience based on your preferences.

In summary, cordless spring roller shades use an internal spring to allow you to effortlessly adjust the position of the shade without the need for cords. This spring mechanism provides easy operation while maintaining a sleek and minimalistic appearance.

To measure for roller shades, follow these steps:

1. Decide on Inside or Outside Mount
Inside Mount: The shades are mounted inside the window frame, providing a clean, built-in look.

Outside Mount: The shades are mounted outside the window frame, covering a larger area for more light blockage and a more dramatic appearance.

2. Measuring for Inside Mount
Width:
Measure the width of the window at three points: the top, middle, and bottom. Use the narrowest measurement to ensure the shades fit properly.

Height:
Measure the height of the window at three points: left, middle, and right. Again, use the longest measurement to ensure the shade covers the entire window.

Depth:
Check the depth of the window frame to make sure there’s enough space for the roller shade to fit.

3. Measuring for Outside Mount
Width:
Measure the width of the area you want the shade to cover. Typically, it’s recommended to add 2-3 inches to the window width on both sides to ensure better light coverage and privacy.

Height:
Measure the height from the top of the window frame to where you want the shade to fall (e.g., window sill, below the sill, etc.).

Projection:
Ensure there’s enough space above the window to mount the roller shade, and check that the shade will clear any obstructions like handles or trim.

4. Double Check Measurements
Always double-check your measurements to ensure accuracy.

If in doubt, it’s better to order the shade slightly larger than smaller to ensure proper coverage.

Once you’ve got the correct measurements, you can order your roller shades for a custom fit.

Dusting
Start by dusting your roller shades using a soft cloth or a vacuum cleaner with a brush attachment. Gently wipe down the fabric or roll the shade up and vacuum along the surface to remove dust and debris.

Spot Cleaning
If you notice stains or spots, mix mild dish soap with warm water. Dampen a clean cloth with the soapy water (avoid soaking it), then gently blot the stain. Do not rub or scrub, as it could damage the fabric.

Drying
If you spot clean or wash, allow the shades to air dry completely. Never put roller shades in the dryer, as the heat can cause them to shrink or distort.